Parts

Bearings and seals

Bearings suitable for all wheels (ceramic and steel) in the sizes 688 and 608.

Spacer

The PC-vane special Spacer system works only with 7mm axles (available at PC-vane), however for both 688, and 608 bearings. The Spacer takes up almost the full length of the bearings. The connection between wheel, axle and frame succeeds thus without play and also without loss of energy.

UFO Spacers, which work with 8mm axles, are also available in the shop, however only for 608 bearings.

Axles

Available in sizes 7mm and 8mm. Suitable for each commercial frame! The 7mm axle (as described under “Spacer”) is adapted to and specially developed for the Spacer system. 8mm axles cannot be used for the special Spacer system, but the UFO Spacers are for 8mm axles.

Tools

There are two different tools. On the one hand there is a three part tool kit, which works with all needed functions and on the other hand a PC-Vane tool for removing bearings and the PC-Vane spacers from the wheel.

go to shop >
back>